AirLive Logo(index page)
Company Products Support Press Members Contactus
 
support-search
Wsparcie Techniczne
Sterowniki i Oprogramowanie
Certyfikaty / Rosja
Deklaracje CE
Specyfikacje
AirLive View
Instrukcje
QIG
Kody GPL
Windows 7 Support List
Web Interface
SDK
Home > Support > Technical Support > WT-2000ARM
WT-2000ARM
 
Q:

Is it possible to configure another DDNS than www.dyndns.org in WT-2000RM?

A:

No, WT-2000ARM supports DynDNS service ONLY.


Q:

Can I change the port of Web Management of WT-2000ARM to port 8080?

A:

The Web Management of WT-2000ARM is fixed on port 80, it can’t be changed.


Q:

How to create WDS connection with WT-2000ARM and WL-5460AP?

A:

Please check example file and follow the steps to configure it. Click Here.


Q:

How can i login to Airlive CamPro Express to see the WEB UI from internet.

A:

Click Here.


Q:

Can I change remote managed port of WT-2000ARM, or disable remote managed function?

A:

No, you can not change WT-2000ARM remote managed port, but you can disable the function by configuring ACL of Access Management item.


Q:

What is AdHoc and Infrastruture

A:

AdHOC and Infrastructure are 2 ways to form the wireless network.
ADHOC (Peer To Peer):

The wireless network are formed by wireless cards only.  There is no access point or wireless router in the network.  Cards communicate directly with each other.  The biggest disadvantage for AdHoc mode is that no network device can be attached to the network directly, thus making connection to LAN and Internet difficult.  It is not recommended to use AdHOC except for small environment.  To work in AdHoc mode, the cards must be set to the same SSID(Network Name) and set to AdHoc(Peer To Peer) mode.
The wireless network are formed by Access Point and cards.  AP or wireless router serve as a hub for connections to the cards.  With Access Point, the users can connect to wired network device such as LAN, router, and internet.  Furthermore, AP allows access control and other security features.  AP also extend the range between the cards.  All AP and cards in a infrastructure network must use the same ESSID(Network Name) and setup to work in Infrastructure (Access Point) mode.

Q:

Why I can not succeed to upgrade the firmware for AirLive ADSL products?

A:
If you can not succeed to upgrade firmware at ARM-201, ARM-204v2, or WT-2000ARM, the possible reason could be that you installed SP3 on WinXP.
We had announced new firmware to solve SP3 issue, but you might need to find another PC without SP3 installed, and use this PC to upgrade new firmware at ADSL device.


Q:

How to connect IP-2000VPN bridge to WT-2000ARM ?

A: Check here

Q:

The data rate rating only represent the physical layer data rate. But what is the actual throughput for the IEEE Wireless Standards?

A: Check here

Q:

How to configure virtual server to ip camera ?

A: Check here

Q:

How do I downgrade WT2000ARM from version 2.9.50 to 2.7.0.28?

A: Check here

Q:

How do I configure WISP mode and AP mode in WT2000ARM and WL5460AP?

A: Please make sure that your WT2000ARM are update to version 2.11.6.0 and WL5460AP firmware to E10. If you have not update yet, please update your WT2000ARM here, and WL5460AP firmware here.
Please check step guide here.

Q:

How can I backup WT-2000ARM configuration?

A: Please enter Maintenance --> Firmware, and press ROMFILE SAVE button, it will save config file to your computer, and you also can restore it back to device on the same place.

Q:

What is WEP encryption

A:

Wired Equivalent Privacy (WEP) is the method for secure wireless data transmission.  WEP adds data encryption to every single packet transmitted in the wireless network.  The 40bit and 64bit encryption are the same because of out 64 bits, 40 bits are private.  Conversely, 104 and 128 bit are the same.  WEP uses a common KEY to encode the data.  Therefore, all devices on a wireless network must use the same key and same type of encryption.  There are 2 methods for entering the KEY, one is to enter a 16-bit HEX digit.  Using this method, users must enter a 10-digit number( for 64-bit) or 26-digit number( for 128-bit) in the KEY field.  Users must select the same key number for all devices.  The other method is to enter a text and let the computer generate the WEP key for you.  However, since each product use different method for key generation.  It might not work for different products.  Therefore, it is NOT recommend to use.  When enable the WEP key, please remember to enable the AP's WEP function before enabling the card's.


Q:

My ISP disconnect the ADSL connection frequently, how can I make my router to reconnect automatically?

A:

Check here


Q:

How do I reset my device back to default setting?

A:

Please find the reset button in the back of panel. Press hold reset button for 20 seconds, wait till all the leds reflash. And after please using the default setting login to your device.


Q:

My wireless transfer is very unstable or stopped sometimes

A:

Please change the wireless channel on your AP or Wireless Router.  Most of the wireless problem are caused by channel interference.


Q:

Why does my AP or Wireless Router doesn't work with Centrino?

A:

Please download the latest Centrino driver from Intel's website.


Q:

When I surf the Internet, I can ping but I can't surf some websites. Why?

A:

There seems to be some virus or browser bug recently that is causing this issue.  It happens to non-AirLive products also.  You can test this syndrome by pressing "Control-F5" to let the webpage reload when you can access the website.  If pressing Control-F5 works, then it is very likely to be the case.    In this case, please reboot your machine in safe mode and runs a virus scan (make sure you have the latest virus definition).  Or reinstall your browser program.

Another possibility is the MTU and MRU value are set incorrectly with your ISP.  In this case, please lower the MTU and MRU value to lower values (such as 1463, 1432, or 1400).


Q:

I cannot login the web interface, what is wrong?

A:

By the default, the user name is "admin", but there may be two possible passwords: "ovislink" or "airlive".


Q:

I am living in Portugal, Austria, or France. My ADSL can't connect, the ADSL LED just keep on Flashing.

A: Please go to "ADSL Configuration" menu.  And change the "Handshake Protocol" to "Auto Sense T1.413 First".  Push the "Submit" button, and then "Save Changes".

Q:

I connect all the power and cables properly, then try to use the installation CD. But the program says no connection. What is wrong?

A:

After connecting all the cables and power on the router.  Please reboot your computer first before using the CD program.  This step will let your computer to get IP address from the router's DHCP server.  The CD program require your computer and the router in the same IP subnet, and your gateway set to the router's IP address.  Rebooting the computer will let the router to do the correct IP assignments for you.


Q:

My ADSL router is working on one location, but when I take it to another location. It doesn't work ?

A:

First of all, please make sure you are using the correct Annex version.  If your ADSL system run over analogue telephone, you should use the Annex A model.  If your ADSL system run over ISDN line, then you should use the Annex B model.

However, if you are using the correct Annex model and correct settings.  But it still doesn't connect.  Please try to use T1.413 First for Handshake Protocol.


Q:

My ADSL router doesn't respond to CD setup program or web configuration

A:

If you turn on the router for the first time, please wait for 5 minutes or more before accessing the router.  This step is not necessary except when operate in unstable electrical environment.  If it still doesn't function, please press the reset button.


  CoreNVR 9  
  2014/10/28  
  CoreNVR 9/16 Bitrate Configuration Chart  
 
  CoreNVR 9  
  2014/09/26  
  BU-3025/v2 shows no image in CoreNVR split screen?  
 
  CoreNVR 9  
  2014/09/25  
  Why is My CoreNVR 9 acting abnormal?  
 
  CoreNVR 9  
  2014/09/17  
  How to improve the performance of BC-5010_BC-5010-IVS_MD-3025_MD-3025-IVS_BU-3026_BU-3026-IVS with CoreNVR 9/16  
 
  CoreNVR 9  
  2014/09/17  
  CoreNVR CMS Demo Video  
 
  CoreNVR 9  
  2014/09/17  
  Problems with login CoreNVR through IE?  
 
  CoreNVR 9  
  2014/09/17  
  Motion Detection on CoreNVR 9/16  
 
  CoreNVR 9  
  2014/09/17  
  How to trigger SD-2020 3 different preset point by another IPCamera's 3 different Motion Detection with CoreNVR Series?  
 
  CoreNVR 9  
  2014/09/17  
  How to send the E-mail Notification with Video and Snapshot when Event is triggered?  
 
  CoreNVR 9  
  2014/09/17  
  CoreNVR 9/16 New Function - E-map  
 
more
   
Ovislink Corp
5F., NO.96, Min-Chuan Rd., Hsin-Tien Dist., New Taipei City 231, TAIWAN
TEL : 886-2-22186888  Fax : 886-2-22186988  E-Mail : info@airlive.com
AirLive
Connects
Facebook Twitter Youtube