WL-5460AP v2
WL-5460AP v2
WL-5460AP v2
WL-5460AP v2

WL-5460AP v2

802.11g Multi-function Wireless Access Point

Podsumowanie funkcji
  • 802.11g Wielofunkcyjny Bezprzewodowy Access Point
  • 2 x 10/100Mbps, 2MB Flash, 16MB SDRAM
  • do 26dBm mocy (Ameryka Południowa) oraz konektor R-SMA
  • 7 Bezprzewodowych Trybów Pracy
  • Zarządzanie Pasmem, wskaźniki poziomu sygnału dla wizowanej anteny
  • Izolacja klientów WiFi, Watchdog, regulowana moc urządzenia
The AirLive WL-5460AP is the world's most popular multi-function 802.11b/g Access Point that operates in 2.4GHz frequency bands. It features incredible 8 wireless operation modes for all types of wireless operations.
7 Mode Wireless
The WL-5460AP v2 features an incredible 7-mode firmware.
AP Mode : The WL-5460AP v2 is the central hub for all your wireless devices.
Bridge Mode : To connect 2 LANs together wirelessly.
Client Mode : Turn the WL-5460AP v2 into a wireless card so you can connect with remote AP.
WDS Repeater : To increase the wireless coverage of a WDS enabled AP/Router
Universal Repeater : AirLive's unique universal repeater function let the WL-5460AP v2 extend the coverage of your AP/Router, even if your AP/Router doesn't have WDS function!
WISP Router : The WISP mode is similar to Client Mode. IP sharing function is added so you can share the WISP connection with many PCs.
WISP+Universal Repeater : The WISP+Universal Repeater mode let you share WISP connection on both wireless and wired side.
AP Router : The WL-5460AP is working as a wireless router. The LAN2 will become the WAN port.
Wireless Client Isolation
The WL-5460AP v2 features the new Wireless Client Isolation function previous available only in more expensive APs. When you enable this function, the wireless clients will not be able to see each other. Therefore, it is an important function for office and Hotspot operator to protect the security between different wireless users.
ACK Timeout and TX Power Regulation
The WL-5460AP v2 features ACK timeout function to let you adjust the timeout value for long distance operation. In addition, 5-level TX power adjustment let you match different antennas for law compliance. The ability to set lower TX output power is also crucial if you want to match the AP with external power amplifier.
Extended Security Features
The WL-5460AP v2 support WEP, WPA and WPA2 security functions. In addition, WPA enterprise for 802.1x authenticator are featured for AP and WDS mode. The combination of Encryption, Hide SSID and Access Control ensures your wireless network is completely secured from intruder.
Whether it's for office or home environment, the AirLive 802.11g family bring you the maximum performance and security for today's high speed wireless network.
* Before configuring TX power regulation, please clean the cookies on your PC first.
Application Diagram
Feature AP, Bridge, Client, Repeater functions
WISP Client Router mode
WISP + Universal Repeater Mode
Detachable Antenna, 2 LAN ports
802.1x, WPA, WPA2 and Web Mgt.
TX power regulation in 4 levels
Watchdog function use PING
Wireless Client Isolation (e8 firmware)
ACK Timeout Adjustment
DHCP Relay function
802.11g Protection
Hardware 2 x 10/100Mbps LAN Port
2MB Flash, 16MB SDRAM
Reversed SMA Antenna Port
Power, LAN, WLAN LED indicators
Antenna 2 dBi detachable Dipole Antenna
Reversed SMA Connector
Frequency Range USA (FCC) 11 Channels: 2.412GHz~2.462GHz
Europe (ETSI) 13 Channels : 2.412GHz~2.472GHz 
Rx Senstivity @ 25°C
IEEE 802.11b
Min (dBm)
IEEE 802.11g
Min (dBm)
Modulation Technique 11g Orthogonal Frequency Division Multiplexing (64QAM, 16QAM, QPSK,
11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Data Rate: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps
Output Power Wersja EU i FCC
- 20dBm Max
- 6 poziomów ustawień
Wersja specjalnie dla Brazylii
- 26dBm Max
- 8 poziomów ustawień
WISP Mode DHCP, PPTP, L2TP, PPPoE ISP Authentication Support
Wireless Client function as WAN
WISP mode is not the same router mode
To configure the WISP mode, you PC must be connected to the LAN port
Security 64/128-bit WEP
WPA/WPA2-PSK support
802.1x Radius Support
WPA Enterprise support in AP/WDS mode
Configuration Web Management
WDS (Bridge, Client, Repeater) mode
MAC Access Control
MAC Access Table
Wireless Client Isolation (e8 firmware)
SSID, Channel, RTS Threshold, Frag Threshold
Environmental Operating temperature: 0~60℃
Operating humidity (non-condensing): 20~80%
Storage temperature: -20~65℃
Storage humidity: 95% Max
Power Supply DC12V
Product Weight (g) 180 g
Product Size
( L x W x H (mm) )
135 x 100 x 26mm

Software & Firmware

  • ETSI firmware, Airlive WL-5460APv2_e19 Details 2013/05/09
  • SA firmware, Airlive WL-5460APv2_e19 Details 2013/05/10
  • EU Firmware version e19_b3, Add Disable NAT and Wireless Client Limit functions, Details 2011/08/22


  • I want to connect to the internal server from internet. What can I do? Details
  • I have a ISP’s wireless signal near my house, how could I connect WL-5460APv2 to internet? Details
  • I have a ISP’s wireless signal near my house, how could I connect WL-5460APv2 to internet? Details
  • When I login the HTTPS web management, there's a message about wrong security certificate ,what can I do? Details
  • I have a remote AP ,how to extend the coverage of the remote AP by WL-5460APv2? Details
  • Why can't I get into the web management , even I press the reset button to reset WL-5460APv2 to factory default setting? Details
  • The value of the signal level in the site survey window ,is it a percentage or dBm? Details
  • What color of the WL-5460AP’s LED turn on? Details
  • Why can't I proceed the emergency function? Details
  • My computer or mobile phone has MAC address starting with something not "00", but I can't seem to add the MAC address to the Access Control List? Details
  • What are the available Telnet and SSH commands? Details
  • What is the default IP address of my AP? Details
  • Where can I find the wireless MAC adress of my AP? Details
  • When I change the WL-5460AP to "AP Router" mode, which LAN port will become the WAN port? Details
  • I tried to use the Emergency Upgrade procedure to restore firmware. But the process failed in the middle. What is wrong? Details
  • "I have 2 x WL-5460APv2 which are placed in different rooms, the link is O.K. but I felt the signal strength is not strong enough. So I change the original 2dBi antenna to WAI-08 8dBi rubber dipole antennas. Then, the link got very unstable. What is the problem? " Details
  • The Bridge mode Setup Guide. Details
  • I am trying to use the WL 5460AP as a WDS repeater, I have some questions: 1. must the SSID the same as the SSID of the AP? 2. How should I configure the DHCP? Details
  • How to secure network with WL-5460AP ? Details
  • I was configuring AirLive 802.11G Wireless AP (WL-5460AP v2), Its quite working over Universal Repeater Mode however when I used WISP and WISP + Universal Repeater Mode I was not able to find the SSID over the wireless. What should be the setting for this, our setup from our source AP was IP authenticated. Details
  • How do I configure QoS for WL-5460AP or WL-5470AP new firmware? Details
  • How to configure 5460APv2 x 3 to work in point to multipoint mode? Details
  • I have a modem of my ISP installed at home. I want to connect my WL-5460AP v2 to it, so need to connect one of the two Ethernet ports of the back of the WL-5460AP to the modem exit (Ethernet port). Only 1 IP address comes out of the modem, so I have a modem of my ISP installed at home. I want to connect my WL-5460AP v2 to it, so need to connect one of the two Ethernet ports of the back of the WL-5460AP to the modem exit (Ethernet port). Only 1 IP address comes out of the modem, so the WL-5460AP needs to behave as router as well. Can it be done and if so, which settings do I need to select to:(1)  Use it as a router (providing IP addresses to the multiple PC’s that want to connect to the WL-5460AP(2)  Can I still also use the second Ethernet port to connect a wired PC to the WL-5460AP? Details
  • WL-5460AP Telnet Command Guide (Firmware e11 or later) Details
  • I have tried to upgrade the WL-5460AP to the 3rd party firmware. But it doesn't allow me to upgrade. What should I do? Details
  • I use WL-5460AP as AP mode, connect directly to a RADIUS server by an Ethernet cable. I want to use RADIUS server for authentication, what do I provide as information? Details
  • The data rate rating only represent the physical layer data rate. But what is the actual throughput for the IEEE Wireless Standards? Details
  • How to set subnet in my PC or NB when I want to enter AirLive product's Web UI ? Details
  • When I set my AP's TX power to level1, the connection is unstable? Details
  • After having upgraded firmware 5460APv2_e10.1 or newer, I set "Wireless Client Isolation" to ENABLE. But clients devices can still see each other. What should I do? Details
  • I heard WL-5460AP has emergency code function that can restore the machine after firmware crashed. How can I use it? Details
  • I download the new WL-5460APv2 firmware. But when I set the the device to AP, Client, or Repeater mode. My PC can't get on the Internet. Why? Details
  • I download the new WL-5460APv2 firmware. But I can't get into the AP's remote management or Ping to the AP from the wireless side? Details
  • When my AP is installed in an outdoor area with a lot of 2.4Ghz traffic, my AP's signal become unstable sometimes Details
  • When I try to enter the MAC address in the WDS field, the Web browser tell me I entered the wrong format. Details
  • When I try to use web management. My browser ask me for Username, what is it? Details
  • The MAC address on the device label is wrong? Details
  • How does the watchdog function works? Details
  • Why is my AP not stable? Details
  • How come the WDS repeater function between WL-5460AP and WIAS-1000G are not working? Details
  • How come the TX power regulation doesn't seem to work correctly? Details
  • My wireless transfer is very unstable or stopped sometimes. Details
  • Why does my AP or Wireless Router doesn't work with Centrino? Details
  • How can I extend the distance using extra AP? How can I create a wireless repeater(WDS)? Details
  • How many users can we link to an access point? Details
  • When I surf the Internet, I can ping but I can't surf some websites. Why? Details
  • What is AdHoc and Infrastruture ? Details
  • What is WEP encryption? Details
  • How can I change to a different wireless network in WinXP? Details
  • In some wireless devices, the ESSID (SSID) is case sensitive Details
WL-5460AP v2 802.11g Wireless Access Point, South America
  13 Code 14 Code
WL-5460AP v2 4719869612908 14719869612905
Standardowe opakowanie
Rodzaj opakowaniae  packing box
Wymiary opakowania 60 x 170 x 245 mm
Waga opakowania 0.9 kg
Zawartość opakowania WL-5460AP, CD-ROM, Quick Setup Guide, 12V Power adapter, Antenna, RJ-45 Cable, Wall mounting kit
Opakowanie zbiorcze
Ilość 20
Wymiary 50 x 35 x 36.5 cm
Waga 19 kg